Bar Thickness |
Positive <numeric value>
- Sets the thickness of the bars forming grille. Disabled for Channel Grate / Parking Drain.
|
Body | Cone Diameter |
Positive <numeric value>
- Sets the diameter of the cone nearest the grille.
|
Body | Cone Height |
Positive <numeric value>
- Sets the height of the tapered portion of the floor drain.
|
Body | Cone Top Diameter |
Positive <numeric value>
- Sets the diameter of the cone nearest the connection point.
|
Connection 1 | Length (L1) Connection 2 | Length (L2)
Connection 3 | Length (L3) Connection 4 | Length (L4)
Connection 5 | Length (L5) Connection 6 | Length (L6)
|
Positive <numeric value>
- Sets the straight length at respective End#.
- Connection 1 | Length (L1) - Port 1 length.
In case of Floor Drain 4/5/6Way;
- Connection 2 | Length (L2) - Port 2 length,
- Connection 3 | Length (L3) - Port 3 length,
- Connection 4 | Length (L4) length,
- Connection 5 | Length (L5) - Port 5 length,
- Connection 6 | Length (L6) - Port 6 length.
|
Connection | End Type |
fl -<numeric value>
- Sets and sizes end with a flange connection.
m -<numeric value>
- Sets and sizes end with a male connection.
fe -<numeric value>
- Sets and sizes end with a female connection.
Separate End Type entries for each End Spec with a semi colon. Example: fl-2; creates a flange at End1 with size 2, and fe-.13; creates a female connection at End1 with an overall reduction of component's dimensions of .13
|
Connection | Length |
Positive <numeric value>
- Sets length of straight portion at connection at END1.
|
Connection | Offset |
Positive <numeric value>
- Sets distance of connection End1 from the left of channel grate.
|
Connection | Side |
- 1-Bottom– across width.
- 2-Side– across height.
- Sets outlet connection End1 on either sides.
|
Depth |
Positive <numeric value>
- Sets depth of the drain, that determines the distance the grille is away from the End connection.
|
Diameter |
Positive <numeric value>
- Sets the diameter of the main pipe of floor drain, usually follows End1 diameter.
|
Flange Offset |
Positive <numeric value>
- Sets the flange offset appropriate with the height of floor trough.
|
Flange | Size |
Positive <numeric value>
- Sets the flange dimension, exterior to the floor trough dimension.
|
Frame | Width |
Positive <numeric value>
- Sets the width of the frame to control the area of grills forming with bars.
|
Grille | Diameter |
Positive <numeric value>
- Sets the outside diameter of the grille.
|
Grille | Thickness |
Positive <numeric value>
- Sets the thickness of the grille portion.
|
Height |
Positive <numeric value>
- Sets the height of the floor trough assembly.
|
Length |
Positive <numeric value>
- Sets the length of the floor drain assembly.
|
Mount Height |
Positive <numeric value>
- Sets the length of the oblique grate above body cone.
|
No. Of Bars |
<integer>
- Sets number of L shape bars.
|
No. Of Horizontal Bars |
<integer>
- Sets number of vertical bars.
|
No. Of Vertical Bars |
<integer>
- Sets number of horizontal bars.
|
Port 1 | Diameter Port 2 | Diameter
Port 3 | Diameter Port 4 | Diameter
Port 5 | Diameter Port 6 | Diameter
|
Positive <numeric value>
- Sets the diameter of respective Port, follows diameter at End#.
- Port1 Diameter ~ D1
- Port2 Diameter ~ D2
- Port3 Diameter ~ D3
- Port4 Diameter ~ D4
- Port5 Diameter ~ D5
- Port6 Diameter ~ D6.
|
Port 3 | Length Port 4 | Length
Port 5 | Length Port 6 | Length
|
Positive <numeric value>
- Sets length of pipe of respective port branches on main pipe.
|
Port4 Connection Side |
- 1-Opposite – opposite of Port3.
- 2-Side – perpendicular to Port3.
- Sets the location of Port4 on the main pipe either opposite to Port3 or on side at 90°.
|
Stub Length |
Positive <numeric value>
- Sets the length of the stub outlet.
|
Width |
Positive <numeric value>
- Sets the width of the floor trough.
|